Description

A pan letter is one that is constructed with an open face and is recommended when open neon illumination is required.

Construction

The shape of the letter is cut out by router, but is used as the floor instead of the face. The edges are smoothed. Sides are cut and smoothed, then shaped to fit, and glued in place using high performance adhesives.

Illumination

The exposed neon is formed to shape according to working drawings. All returns must always pass through the floor of the letter so that all connections are concealed behind. Condoms must always be used.

Applications

1. Indoor or outdoor applications
2. Casino spectaculars
3. Shops & shopping centres
4. Hotels and restaurants
5. Primary pylon signage

Finishes

Perspex presents a hard highly glossy surface, and cut edges may be smoothed and polished to the same gloss finish. It is available in a fixed range of opaque, translucent, clear and smoky colours, but it may be spray-painted
for accurate colour-matching.

Sizes

1. Letters from ± 200 to 1 200 mm in height, and
2. 70 to 200 mm depth when illuminated, or
3. 20 to 200 mm depth for non-illuminated letters

Installation

Depending on use of illumination; Care must be taken as fires could result from faulty workmanship.
1. Flat onto any flat surface
2. On pins